• Hello MLAers! We've re-enabled auto-approval for accounts. If you are still waiting on account approval, please check this thread for more information.

Macintosh IIfx tries to start but won't catch

plat

6502
I'm guessing this is a common problem as they age but I have had trouble describing the issue and finding information. Basically when you hit the power switch there is at least a click and sometimes it begins to power up to the point of starting the chime and then quits. It was working perfectly when last run probably 10 years ago. I have already replaced the pram batteries and re-seated everything including the memory chips and power supply connection to no effect.

I suspect bad capacitors at this point? If so, more likely on the motherboard or in the power supply? I just want to be cautious with it and not take the risk in doing anything unnecessary if I can avoid it.

I appreciate any thoughts on this.
 
There are a couple of different versions with different quantities of electrolytic capacitors of the motherboard. Can you take pictures of the motherboard? (Particularly the right side --that's where the power on/off logic is located)
 
Back
Top