Hello,
I was wondering if there is anyway to modify the mainboard of the Mac SE/30 so that it would provide the simm slots 3.3V instead of 5V.
I have a set of 8 x 16MB Keystron which uses the MT4LC16M4T8 chips and according to the datasheet of these chip, they use a minimum of 3V and a maximum of 3.6V.
So I guess using them in a Mac SE/30 although it seem to work with one set of 4 x 16MB, the Mac can be very unstable and acting weird resulting in bus errors and that can't of stuff I guess.
For me the 128MB kit is not working as it seems there is one faulty simm or it could be that this simm is not taking the 5V.
That is why I was wondering if there is a modification on the motherboard known to have the simm slots use 3.3V instead of 5V.
Regards,
Stefan
I was wondering if there is anyway to modify the mainboard of the Mac SE/30 so that it would provide the simm slots 3.3V instead of 5V.
I have a set of 8 x 16MB Keystron which uses the MT4LC16M4T8 chips and according to the datasheet of these chip, they use a minimum of 3V and a maximum of 3.6V.
So I guess using them in a Mac SE/30 although it seem to work with one set of 4 x 16MB, the Mac can be very unstable and acting weird resulting in bus errors and that can't of stuff I guess.
For me the 128MB kit is not working as it seems there is one faulty simm or it could be that this simm is not taking the 5V.
That is why I was wondering if there is a modification on the motherboard known to have the simm slots use 3.3V instead of 5V.
Regards,
Stefan
