How hot do 1.33ghz DP CPUs run?

[Unknown_K]

I found a heatsink for my 1.33Ghz MDD DP CPU (a little corrosion on it) and was wondering what temp these are supposed to run at. After running X-bench and letting it idle a while the temp got to 51C which seems a bit high to me.

Anybody else have one of these? Seems like a decent speed upgrade (has 2MB cache) from a 1.00ghz DP.

 

[Byrd]

51deg is nothing to worry about, they usually hover around this. If not crashing, nothing to worry about. Have you cleaned all the crud/thermal pad off the old heatsink and replaced with new grease?

 

[Unknown_K]

Yup. Went to middle 50's when I let it run a while. Would a replacement fan (more efficient) be worth looking into, if so what type?

Also is the Xbench 1.3 database offline?

 

[waynestewart]

I have a dual 1.33 with the thin finned heat sink. Seems to idle at 51-52C. If I run CHUD nap mode then the temp drops 10C.

Strangely, my 1.42 overclocked to 1.5 with the copper heat sink cools down to the same temp after a workout.

 

[Byrd]

Yup. Went to middle 50's when I let it run a while. Would a replacement fan (more efficient) be worth looking into, if so what type?
Also is the Xbench 1.3 database offline?

Unless overclocking I wouldn't bother. If you are keen however (note I've not looked at an MDD for a while - assuming it is that), see how much clearance is between the heatsink and power supply. Go for the biggest, slowest fan you can find that will fit - any 12V one will do, and it could be attached by various means - automotive double sided tape, self-tapping screws, etc.

The last version of GeekBench (v2) is still PPC