• Hello MLAers! We've re-enabled auto-approval for accounts. If you are still waiting on account approval, please check this thread for more information.

Early Apple Studio Display LCDs

Greetings all,

Well I've finally completed the set of early Apple 15" LCD panels.

Just received a 'dark blue' Studio Display (with the old Mac connector and ADB ports) and tested it on a PM8600 and it works beautifully. Only a couple of minor marks on the plastics that I can see. Given it was sold 'as is' without a power supply I am surprised that it actually worked!

This winds out the 'early' LCD set as I recently grabbed a version 2 of the same monitor (the 'Blue and White' variety with VGA connector) and the version 3 'Graphite' model (with DVI and USB connectors).

All tested and working well.

As I've not seen (m)any of these available in Australia - had to grab them from the USA and pay the usual high shipping costs. Fortunately, most of them were shipped just prior to the USPS pricing changes.

I'll grab some snaps of them at some point. If there is any particular interest, let me know and I'll try and grab relevant photos.

Regards to all,

Macdownunder.

 
Just received a 'dark blue' Studio Display (with the old Mac connector and ADB ports) and tested it on a PM8600 and it works beautifully. Only a couple of minor marks on the plastics that I can see. Given it was sold 'as is' without a power supply I am surprised that it actually worked!
Nice, that's the type that I've got a couple of :) They seem relatively rare, you hardly ever see them on eBay or anywhere, or certainly a lot less than the later displays - I suppose their original price of $2,000 made them a niche product back in '98!

Does the base on yours work? - the height adjustment mechanism is quite weak on these Rev As and one of mine (like quite a lot of them) is stuck in the lowest position (that's why I asked for another one when I discovered that it was broken :p )

 
Does the base on yours work? - the height adjustment mechanism is quite weak on these Rev As and one of mine (like quite a lot of them) is stuck in the lowest position (that's why I asked for another one when I discovered that it was broken :p )
I am very fortunate that the support arms on all three of mine currently work.

Actually, thanks for the heads up! I read your previous post about this and have been very careful since receiving the displays to carry them by the base and to not manipulate the screen position too much. Hopefully that way they will remain in working condition.

Regards,

Macdownunder

 
On the two newer ones, the Rev B and C, you should be OK, I think they strengthened the support for those, only the dark blue one with the old-style display connector was a little weak. I never adjust the one of mine that works, just to be as gentle on it as possible (though I don't know if just the weight of the screen pushing down on it might be wearing it out :( ) - I think the B and C have better backlights too, I'd quite like to have two of those instead! (though the originals are cool to have in their own way, as they were the first proper non-laptop Apple LCD - I'm not counting that one for the Apple II or whatever it was! :p )

 
On the two newer ones, the Rev B and C, you should be OK, I think they strengthened the support for those, only the dark blue one with the old-style display connector was a little weak.
Great - good to know. Thanks!

(though the originals are cool to have in their own way, as they were the first proper non-laptop Apple LCD - I'm not counting that one for the Apple II or whatever it was! :p )
Actually, the TAM preceeds the Studio Display by exactly 12 months having a 12" Colour LCD built in.

I also have the Apple //c LCD display. It is monochrome, quite small (23x40 lines of text from memory?) and has no backlight. Mine does not have a manufacture date, but since the //c production was terminated in November 1990 - it certainly wins in seniority by several years.

Regards,

Macdownunder

 
Back
Top