• Hello MLAers! We've re-enabled auto-approval for accounts. If you are still waiting on account approval, please check this thread for more information.

Disassemble Apple 24x ATAPI CD-ROM

Does anyone know how to disassemble Apple 678-0136 (Panasonic CR-585-B) ATAPI CD-ROM drive?
Its controller board probably needs recapping. But I'd also like to take a closer look at the ICs and eventually dump the firmware.

I suspect that the PCB is held by the tray motor - see those fat soldering pads marked with the red lasso:

Tray motor soldering pads.jpg

Do I need to desolder the tray motor to get access to the PCB's front?

I don't want to break anything.

Thank you in advance!
 

Attachments

  • CR-585-B drive.jpg
    CR-585-B drive.jpg
    59.1 KB · Views: 6
  • CR-585-B Cover.jpg
    CR-585-B Cover.jpg
    50 KB · Views: 6
  • CR-585-B tray.jpg
    CR-585-B tray.jpg
    36.2 KB · Views: 6
  • CR-585-B Controller PCB.jpg
    CR-585-B Controller PCB.jpg
    94.8 KB · Views: 6
Hum, I would expect it to need recapping quite yet. They're late 90s.

I've only taken one apart far enough to clean the lens.
 
Back
Top