I purchased this board and if all goes well, I will have it on hand to analyze with more precision but in the meantime I am asking you what your take is on two details.
1) The jumper wire spanning 3 chips, what might account for this jumper?
2) A blotched area on the board? [UD8] NOTE: in one of the images I marked the questionable area in read inside the yellow frame.
3) Does Q3 look ok? What is that component and is it there or missing?
What I do know, the caps were leaking but on request the board was cleaned up so that while it ships, if it continues to leak it will not arrive in as bad a shape. Other than this I have no other history that I can offer.
I look forward to your interpretations of what is documented in the pics. Thanks!
Kind regards
—Alex





1) The jumper wire spanning 3 chips, what might account for this jumper?
2) A blotched area on the board? [UD8] NOTE: in one of the images I marked the questionable area in read inside the yellow frame.
3) Does Q3 look ok? What is that component and is it there or missing?
What I do know, the caps were leaking but on request the board was cleaned up so that while it ships, if it continues to leak it will not arrive in as bad a shape. Other than this I have no other history that I can offer.
I look forward to your interpretations of what is documented in the pics. Thanks!
Kind regards
—Alex





Last edited by a moderator:




