last weekend i replaced capacitors in a bad looking Classic II Logic Board.
first boot resulted in no chime, and vertical stripes.
The Egret chip is surrounded by capacitors in this board, and a previous repair proved fluid can be found under this unit.
I removed the chip, and a trace was found to be missing.
I replaced the chip and run a patch wire to repair the trace and pad.
Got a chime and a working C II.
first boot resulted in no chime, and vertical stripes.
The Egret chip is surrounded by capacitors in this board, and a previous repair proved fluid can be found under this unit.
I removed the chip, and a trace was found to be missing.
I replaced the chip and run a patch wire to repair the trace and pad.
Got a chime and a working C II.
Last edited by a moderator:
