Recent content by NZ_KGB

For file sharing you could use a Macipgw vm https://www.macip.net/ ,very easy to set up I've been using it for moving files from a Windows PC to my SE

Thanks for the replies! I'll just leave it until I have lots of spare time/boredom. Thanks for the Offer @ScutBoy, I'm in New Zealand though so shipping would be very $$$.

I got a IIci with a badly exploded battery, after cleaning it with denatured alcohol it looks like this: The damage is definitely very bad around where the battery was, the  oscillator chip is definitely gone. Apart from de-soldering and cleaning under the rom chips, testing/repairing the...

Thanks for this, it's awesome! I tried getting Vicomsoft Internet Gateway working on a G3 with no luck before I found this. Se/30 -> phonenet/localtalk -> Power Mac G3 (system 9.2 with localtalk bridge) -> macipgw vm Can now easily share files between my Windows PC and the SE/30 by...

Running better now with 8 simms, after abut an hour got these messages:

I got it up and running, but now it freezes after some time and won't boot again for a while. Have swapped the ram around again a few times with known working simms, Symptoms are a bit random, sometime it death chimes on cold boot but OK when reset, other times boots OK, it always freezes...

Success, after cleaning the contacts and swapping the RAM around I got the original 4 to work. Thanks again!

Thanks for the replies, I didn't know about the whole bank needing same size RAM and needing to be full, will try that. I only have a working Mac Classic II, would that work testing 2 simms at a time in it? With the replacement caps for the axial ones, the picture makes them look a lot taller...

Recently acquired an SE/30, originally it had just a vertical line on the screen and no chime. I've re-capped the digital and analog boards. Washed the digital board with denatured alcohol. Now it just shows the stripped screen and death chimes, same as here: I'm fairly new to these kinds...