fimbulvetr
Well-known member
I recently picked up an almost mint PB Wallstreet PDQ running System 9.2 to use as a bridge computer with my SE/30, SE, and Classic II. It works perfectly except for dead PRAM and main batteries. I have a bunch of old WiFi PCMCIA cards around the house, including a Cisco 350, so I hope to find the drivers and get it set up for wireless networking. I am having difficulties getting AppleTalk to work with my SE/30. All the compact macs happily connect and work with each other, and the PB will connect to the SE/30 and mount the SE/30 HD. My problem is that the SE/30 sees the PB, but when I go to mount the PB HD, the SE/30 has a "Divide by 0" error and requires a reboot.
Also, I would like to replace the PRAM and main batteries, but my problem is finding a source that will ship to Canada. I can't find a source for the main battery, and the only PRAM battery I've found is US$45 with shipping. That seems steep to me, but I don't really know what one should expect to pay for one of those.
So, can anyone help me with my divide by 0 error and getting some batteries to the great white north? Any hints on getting wireless running? I quickly found out that just plugging the card in is not good enough. It sees the card, but I can't get anywhere from there. I assume drivers are in order.
Thanks.
Also, I would like to replace the PRAM and main batteries, but my problem is finding a source that will ship to Canada. I can't find a source for the main battery, and the only PRAM battery I've found is US$45 with shipping. That seems steep to me, but I don't really know what one should expect to pay for one of those.
So, can anyone help me with my divide by 0 error and getting some batteries to the great white north? Any hints on getting wireless running? I quickly found out that just plugging the card in is not good enough. It sees the card, but I can't get anywhere from there. I assume drivers are in order.
Thanks.