LCGuy
LC Doctor/Hot Rodder
So last Sunday I went to fire up my TiBook 500, which worked perfectly the last time I used it. Hasn't been fired up in about a month, so naturally I expected the battery to be flat, but the machine to otherwise boot.
The machine is completely dead. At this point I've tried a different power adapter, tried different RAM, and stripped the machine down to the basic components needed to power on (logic board, LCD, speakers, one RAM module, PMU board) and still no joy. I do have, a sealed, new in box PMU board that is an Apple Service Part that was never used, which I'm going to swap in tomorrow. Any other ideas as to what could be up?
The machine is completely dead. At this point I've tried a different power adapter, tried different RAM, and stripped the machine down to the basic components needed to power on (logic board, LCD, speakers, one RAM module, PMU board) and still no joy. I do have, a sealed, new in box PMU board that is an Apple Service Part that was never used, which I'm going to swap in tomorrow. Any other ideas as to what could be up?