I could use your expertise.
I’ve acquired an SE30 with an issue. It has 8mb of ram and boots easily from the floppy drive.
However, the hard drive is not recognized. I’ve pulled the hard drive and it works fine with my SE.
Ive tried several known ’good’ hard drives on this SE30 but none are recognized. Ive tried them on the external and internal connections. I’ve tried a scsi2sd drive and a blue scsi. Nothing is recognized. ScsiProbe 3.5 sees the motherboard at ID 7 but nothing else. It also reports ‘no termination’ on the computer. I’m assuming this is a motherboard problem? Maybe a blown fuse on the scsi connector?
I’ve tried replacing the ram and using different configurations. I’ve tried different HD setup programs.
what am I missing?
Thanks!!
I’ve acquired an SE30 with an issue. It has 8mb of ram and boots easily from the floppy drive.
However, the hard drive is not recognized. I’ve pulled the hard drive and it works fine with my SE.
Ive tried several known ’good’ hard drives on this SE30 but none are recognized. Ive tried them on the external and internal connections. I’ve tried a scsi2sd drive and a blue scsi. Nothing is recognized. ScsiProbe 3.5 sees the motherboard at ID 7 but nothing else. It also reports ‘no termination’ on the computer. I’m assuming this is a motherboard problem? Maybe a blown fuse on the scsi connector?
I’ve tried replacing the ram and using different configurations. I’ve tried different HD setup programs.
what am I missing?
Thanks!!