Von
Well-known member
Hi All,
One of my SE/30s is getting its motherboard recapped and this is what is PSU looks like with leaky goo:
The machine has a new old stock analog board and will have the following when completed:
Given this planned configuration, would you recommend getting the PS recapped or heading down the path of hacking in an ATX power supply? FWIW, reecapping is not in my skill set but I think I could follow along to do the ATX if it is just soldering some wires.
TIA for the input!
~Von
One of my SE/30s is getting its motherboard recapped and this is what is PSU looks like with leaky goo:
The machine has a new old stock analog board and will have the following when completed:
- Micron Video card with grayscale adaptere
- Daystar 50 mhz accelerator that goes plugs into the socketed motherboard
- Asante Ethernet
Given this planned configuration, would you recommend getting the PS recapped or heading down the path of hacking in an ATX power supply? FWIW, reecapping is not in my skill set but I think I could follow along to do the ATX if it is just soldering some wires.
TIA for the input!
~Von