• Updated 2023-07-12: Hello, Guest! Welcome back, and be sure to check out this follow-up post about our outage a week or so ago.

Mac OS 9 compatibility

winterlight

Active member
Hi guys,

I just bought  a Power Mac G4 which according to wikipedia can use the universal install of Mac OS 9.2.2 -- https://en.wikipedia.org/wiki/Mac_OS_9#endnote_A1

(I have the PowerMac G4 (quicksilver))

I installed the OS fine but once the installed OS boots it freezes.

It seems like this is because the OS is not actually compatible with the hardware.

According to the page below even universal install images have a special procedure to install as a universal install (which is totally confusing to me)

https://discussions.apple.com/thread/936301?tstart=0

I downloaded the image from here

https://www.macintoshrepository.org/126-mac-os-9-2-2-universal-2013-edition-

Does anyone have any experience with this sort of thing?  If I need a machine specific version does anyone know where I can find a Mac OS 9 image for a Power Mac G4 (Quicksilver)  [not the 2002]?

Thanks again for your help guys.

 

Macdrone

Well-known member
My quicksilver is acting odd and not booting as of this last week into 9 or X of any flavor.  I have not messed with it much but yes the 9.2.2 should work just fine in it.  Mine had worked fine until it sat.  I did try the cuda switch, remove cards and extra ram, no change.  Got one kernel panic, changed to another processor I had same thing.  I am unsure why.  I would hate to think caps, but the longer it was plugged in the less it happened.  If its caps there are a bunch on that motherboard.

 

just.in.time

Well-known member
That universal disk has some issues with my quicksilver as well. I had to boot with extensions off and then disable some graphics drivers.

I'd reccomend finding the correct restore disk like others mentioned.

 
Last edited by a moderator:
Top