AichEss
Well-known member
I’m trying to get a Radius GS/C-MP video card to work in my IIci.
The particulars: Recapped MLB IIci with 32 MB RAM, the card in Slot “D”, a M1297 AppleColor HiRez RGB monitor, SS 7.5.2, RadiusWare versions 2.3.2 or 3.2.5. The RadiusWare installer loads two Control Panels and one Extension. The card is in excellent physical condition - it looks like new.
A Macintosh video card in the slot works just fine. With the Radius card the monitor does nothing - nil, zip, nada - either with or with out the “T” key held down at startup. In fact, with the “T” key held down I sense that the hard drive does not run nearly as long as it should. PRAM Zap makes no difference
I don’t have a manual or user’s guide for the card. There are three jumpers on it that I haven’t touched. Have I missed a step here or what?
The particulars: Recapped MLB IIci with 32 MB RAM, the card in Slot “D”, a M1297 AppleColor HiRez RGB monitor, SS 7.5.2, RadiusWare versions 2.3.2 or 3.2.5. The RadiusWare installer loads two Control Panels and one Extension. The card is in excellent physical condition - it looks like new.
A Macintosh video card in the slot works just fine. With the Radius card the monitor does nothing - nil, zip, nada - either with or with out the “T” key held down at startup. In fact, with the “T” key held down I sense that the hard drive does not run nearly as long as it should. PRAM Zap makes no difference
I don’t have a manual or user’s guide for the card. There are three jumpers on it that I haven’t touched. Have I missed a step here or what?