Floofies
Maker of Logos
I have a LaCie Joule 730 HD. It's an external SCSI hard drive with a Quantum Lightning 730s 2400 inside it.
It spins up and the electronics seem to work ok, but the drive itself does not seem to operate properly. I last got it working on a Macintosh SE about 6 years ago, but when I recently tested it on a Quadra 630 it does not mount, and Anubis 2.54 cannot format it. Drive Setup says <not supported>.
I get the following messages from Anubis:
Formatting drive with default interleave
Format failed
Trying alternate format...
Format failed
Error in Alternate Format
Error Sense Key= 02 04
I'm thinking the drive just failed, but are there any other possibilities? I wouldn't expect to need a driver...
PS: Yeah I know it might be obvious, but I'm asking on the off chance it may be something else. I plan to sell it either way and I would like to make an informed listing!
It spins up and the electronics seem to work ok, but the drive itself does not seem to operate properly. I last got it working on a Macintosh SE about 6 years ago, but when I recently tested it on a Quadra 630 it does not mount, and Anubis 2.54 cannot format it. Drive Setup says <not supported>.
I get the following messages from Anubis:
Formatting drive with default interleave
Format failed
Trying alternate format...
Format failed
Error in Alternate Format
Error Sense Key= 02 04
I'm thinking the drive just failed, but are there any other possibilities? I wouldn't expect to need a driver...
PS: Yeah I know it might be obvious, but I'm asking on the off chance it may be something else. I plan to sell it either way and I would like to make an informed listing!
Last edited by a moderator: