Johnnya101
Well-known member
Made a little more progress. Turns out I mixed up drivers, and was using a generic post script one. Got one off a Mac os 9 disk for the IIg. I noticed that it seems Apple only planned for these to ever have 8 megs of ram at most, so I changed the byte size and 8 meg options to 32 within the ppd.
The printer now prints from any page, however it only prints two pages no matter what. It will print one page blank, then one with the words:
"ERROR;
rangecheck
OFFENDING COMMAND:
SubFileDecode
STACK:
455024 (This number changes every print)
--nostringinterval--
--nostringinterval--
5"
Any ideas? I have tried with the unedited ppd and the 32 meg updated one, both produce the same results. Here is the log: https://pastebin.com/TFZJzPku
I'll try some other PPDs in the meantime.
The printer now prints from any page, however it only prints two pages no matter what. It will print one page blank, then one with the words:
"ERROR;
rangecheck
OFFENDING COMMAND:
SubFileDecode
STACK:
455024 (This number changes every print)
--nostringinterval--
--nostringinterval--
5"
Any ideas? I have tried with the unedited ppd and the 32 meg updated one, both produce the same results. Here is the log: https://pastebin.com/TFZJzPku
I'll try some other PPDs in the meantime.