Is it possible to simultaneously connect two external hard drives to a Color Classic? I have two external drives with 50 pin Centronic ports. One is an Apple drive, while the other is not. I have attempted to do so using a double male 50 pin cable between the two drives, then using a 50 pin to 25 pin cable to connect to the Color Classic. Only one drive, the Apple 1GB, shows up on the CC desktop. If I shut the CC down, then shut the Apple drive off before restarting the CC, then the other drive will show up on the CC desktop. I have used a terminator on one drive as well as trying without. No change. As the CC only has the one 25 pin port, I am concluding that’s the limit - only one external drive at a time. Is this a correct assumption, or is there a workaround to connecting two external drives simultaneously? Thanks much for any wisdom you can offer.