Hi guys, a couple of weeks ago purchased a centris 610, so i can get again into the 68K mac thingy, and it worked for like a week fine but now mysteriously died on me .
I was installing some games and stuff and when rebooted i got the power up chimes and then imminently the Death chime.
So i do the usual removed everything from the board checked the PSU voltages, replaced CPU etc to no avail same issue.....
Then i checked the electrolytic SMD caps and they where in bad shape so i removed all, cleaned the board checked for bad traces several times and install all new caps.
But the issue continue, there's not much else to do expect replace the logic board.
This video is not mine but is exactly what happens to my centris
I was installing some games and stuff and when rebooted i got the power up chimes and then imminently the Death chime.
So i do the usual removed everything from the board checked the PSU voltages, replaced CPU etc to no avail same issue.....
Then i checked the electrolytic SMD caps and they where in bad shape so i removed all, cleaned the board checked for bad traces several times and install all new caps.
But the issue continue, there's not much else to do expect replace the logic board.
This video is not mine but is exactly what happens to my centris