Capacitor list for SE/30 analog board

[alasdairrr]

Hey all - here's my personal set of picks on Mouser for the SE/30 AB, 820-0206-C, based primarily on Wurth + Vishay caps. Merchandise comes to £14.35 (UK - Plus need to add £12 for shipping):

BOM: https://docs.google.com/spreadsheets/d/14eUpxnzS-28ojf43LLS8Wes1yBZ_ZRqNXeRepNDqTJU/edit#gid=0

Mouser Basket: https://www.mouser.co.uk/ProjectManager/ProjectDetail.aspx?AccessID=da7d2b0c95

Note that the original cap diameter/lengths are estimates, measured using my callipers. My replacement cap lead spacing should match the holes on the board. Will update this BOM if any don't match.

Thanks so much for all the info on this thread which was extremely helpful in confirming things and pulling this together.

 

[alasdairrr]

After discussions/research, I've updated my SE/30 Analogue BOM with low ESR Wurth caps (thanks to everyone who suggested some fixes on Retro Tinkering discord):

BOM: https://docs.google.com/spreadsheets/d/14eUpxnzS-28ojf43LLS8Wes1yBZ_ZRqNXeRepNDqTJU/edit#gid=0
Mouser Project: https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=B4A0C6578D

I've also done a Sony CR44 PSU BOM with Wurth caps based on JDWs spreadsheet:

BOM: https://docs.google.com/spreadsheets/d/1Ow59jYNyoS5GcUzIVML9ewuD0l6yDcC_SJfAjWMubXE/edit#gid=0
Mouser Project: https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=7DA3CFAB56

Everything is in stock and I've just placed an order on Mouser. Hopefully my SE/30 won't blow up

 

[ScutBoy]

Thanks for doing the work, and sharing it!