My much loved 180 has succumb to tunnel vision and is now used with an external display. Still wanting to take a 1xx around with me, I was given a very nice 180c with a few goodies: system disks, VST ThinPack, and a snazzy case.
The 180c is in nice condition save for an annoying trackball but at least it has a port door. After a few disappointments with some 68k portables, I really want this 'Book to be a reliable travel machine. The SCSI drive is tiny and noisy, so I think a CF adaptor is in its future. Any recommendation on the best CF speed rating?
I cleaned the trackball innards but it feels like there is a physical problem. Is the solution only a new mouse/keyboard unit? No cracks that I can see in the housing or gunk in the springs.
VST ThinPack- salvageable cells? I haven't plugged it in yet but I also know very little about them. I'm assuming its NiMH. I don't have the manual to know for how long to leave it plugged in, but I'm assuming the little LED will tell me.
Recapping- No apparent problems so far save for a small speaker pop before an alert sound. Would it be prudent to recap anyway due to age?
I have no confidence (or time) to recap myself. Are there any members here who run a save-the-mobo service? Same for replacing the backlight?
Lastly, the LCD housing is still quite snug but the left side is starting to pull away. Is there a better solution than glue? I can see the LCD pull away from the front bezel just slightly when gently closing the lid.
I haven't done a tear down just yet. I am still basking in the newness and starting to take stock of what needs to be done.
The 180c is in nice condition save for an annoying trackball but at least it has a port door. After a few disappointments with some 68k portables, I really want this 'Book to be a reliable travel machine. The SCSI drive is tiny and noisy, so I think a CF adaptor is in its future. Any recommendation on the best CF speed rating?
I cleaned the trackball innards but it feels like there is a physical problem. Is the solution only a new mouse/keyboard unit? No cracks that I can see in the housing or gunk in the springs.
VST ThinPack- salvageable cells? I haven't plugged it in yet but I also know very little about them. I'm assuming its NiMH. I don't have the manual to know for how long to leave it plugged in, but I'm assuming the little LED will tell me.
Recapping- No apparent problems so far save for a small speaker pop before an alert sound. Would it be prudent to recap anyway due to age?
I have no confidence (or time) to recap myself. Are there any members here who run a save-the-mobo service? Same for replacing the backlight?
Lastly, the LCD housing is still quite snug but the left side is starting to pull away. Is there a better solution than glue? I can see the LCD pull away from the front bezel just slightly when gently closing the lid.
I haven't done a tear down just yet. I am still basking in the newness and starting to take stock of what needs to be done.


