Jump to content

Recommended Posts

  • 68kMLA Supporter

Mounting NuBus motherboards in ATX (or older AT) style cases is problematical because of the expansion slots. The NuBus slot openings have those little nubs for the NuBus card backplane thingys to hook onto and the ATX has nothing similar.

 

To really make it work, you'd probably need to do some custom sheet metal for the backplane of the case.

 

But in general, and if you don't care too much about the card fit, yeah, it can be done. You'll need to look up the pinout for the ATX power supply and compare it to the Q950 PS to get the pinouts correct. Also, you'll probably need to put an inverter on the Power-on wire, because I think the Mac expects 5V and the ATX expect GND.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...