Jump to content


  • Content Count

  • Joined

  • Last visited

About Saberpeep

  • Birthday March 25

Profile Information

  • Gender
    Not Telling
  1. If you're interested, I wrote up an article about my experience getting my Macintosh SE working, with JAZ drive and serial file sharing. http://saberpeep.blogspot.com/2016/03/my-new-macintosh-se.html
  2. After staying up late and doing some serious trial-and-error, I managed to figure it out. For those of you in the future who have the same problem: You have to use iomega driver version 4.3, and its respective tools program. Iomega driver version 4.2 is too old to work with JAZ disks it seems. Iomega driver version 5.x or greater is too new to work with or boot a classic Macintosh. You must use iomega tools 4.3 to format the disk before installing SSW, even if it seems to be already formatted ok. The formatting process puts a version of the drivers into a partition on the JAZ disk, which makes
  3. I formatted it using the Beige G3 running 9.2.2, which calls it "MacOS standard". ( As a side note I previously did a similar procedure and got the SE to boot off an internal zip drive, but I only have one SCSI zip drive, and I had to borrow it from the G3. However, this JAZ drive, unlike the zip drive, is external. )
  4. Hello, I was wondering if anyone could help me with booting off a JAZ disc. I recently acquired a Macintosh SE, however the hard disc is dead. I have a JAZ drive that I've never used before, and was wondering if I could get it to boot my SE. I plugged it into my Beige G3, formatted the disk, and installed system 7.1 on it. I left the disk in the drive and plugged it into my SE. I turned the jaz drive on, then the SE, (as I've been told it will act like a regular HDD if I do this). However, upon startup, the SE doesn't even seem to access the JAZ drive. I have tried setting the internal termina
  • Create New...