Jump to content


  • Content Count

  • Joined

  • Last visited

Everything posted by rafthe030

  1. I know the L2 interface is impossible It was just to give my version of the "So what should give better performance, 1M clock divided backside L2 or 512K of on die (frontside?) L2? " in one of your previous posts. By mentionning the L1 I just meant the branch predictor and data caching mechanism will do their job and try to utilize the L2 and main memory, no matter how slow, the right way. And by "less frontside bus transactions" I meant less stalls from cache misses (not caching itself) since the bigger and heavier the dictionary, the more entries you can look up before having to
  2. I'm not wanting to be a disturbance here; In fact I'm just keeping watch out of curiosity. I believe more external backside cache (as opposite to less, faster on-chip) would be a bigger help, given a slow frontside bus with even slower memory will disproportionately bottleneck a (300mhz+?) chip at each FSB transaction. To me the trick should be to avoid as many FSB transactions as they're the worst case scenario (even more here). More backside cache is likelier to do so, and the L1 will still do its job..
  3. @gpbonneau the lower-profile newertech card in the picture is the kind of newertech upgrade that could be a candidate for use in my 7100 (with the sonnet pds ribbon cable). I expect the clock multiplier is the only thing that prevents it from working in a 7100/8100 but, needless to say, mixing the sonnet ribbon cable with such a card to connect the HPV is way too scary to try; especially when I have no next to no spare parts (a single 7100/80 mainboard and a 2MB HPV). Possibly that may change if I find some theory to back up what would happen? @Trash80toHP_Mini On macsales.com arou
  4. Took some time to respond, sorry. I believe my card is an older version, yes. It has a purple heatsink, though I'm not sure that means anything. It was bought around 1999-2000 (dropped the 7100 board in a centris 650 case I had about a year before that) and has always been used in the 7100 since then. It was the cheapest model that came with 1MB backside cache at the time. And I'd say it's pretty much stable, no freezes as long as I don't access a file system via the SEIV at the same time the G3 is running. My current drive is connected in fast-wide mode from an externa
  5. @gpbonneau Yes that's still of help, It clarifies at least a few things and I didn't know the ribbon cable was soldered to the newertech card. Thanks for the info!
  6. I'm using 2.0rc2. Mind telling me if the SiliconExpress control panel detects your card in case you're using the same firmware version? For me it only does when 1.65 is in use, though with 1.65 disk throughput goes from 15MB/s to 5-6MB/s thus defeats the purpose of the card. It doesn't work with the G3 either. What crescendo/fortissimo G3 do you have exactly?
  7. Not too long ago I returned on my PM 7100/80, which right now has a sonnet PDS g3 260/1M, a 4MB HPV card connected via the g3 card's ribbon cable, and one nubus slot used by an Atto SiliconExpress IV. For a few reasons (among others, using a disk attached to the SEIV at the same time the G3 is enabled freezes the machine without exception) I'm looking for a comparable newertech G3 upgrade. G3 upgrades sales seem to become sparse, sort of. There's a couple listings on ebay that are not reasonable to me, price-wise. While I'm unsure getting a newertech upgrade would make
  8. If the card isn't bootable, I am a bit confused for the fact I managed to boot on the drive connected to it. I gave up on getting it to work on my IIci after another week of unsuccessful attempts. At least my Power Macintosh can use it.
  9. I tried on 7.5 on my powermac and 7.1 on my IIci. 7.5 works fine. I just thought about something. Can a mac IIci use two scsi buses at once? The only thing i havent mentionned is that I boot from my onboard scsi while the card is on. I'm going to try it only with a drive on the SEIV. Atto never mentionned in their manuals that you could use both buses. The only instructions are for using the same drive with the Silicon Express IV.
  10. I boughta pair of Atto SEIV on ebay about half a month ago. My first goal was to get one of those "monsters" to work with my mac IIci which boots mac OS 8.1 (mostly) on a large 72 gb Fujitsu 10000rpm ultrascsi drive. When they shipped: first thing should have known before was that those two cards weren't always well-treated. I couldn't see it on the only picture on the listing, but four or five pins on a chip for each card were bent and causing short-circuit. Since I wanted these cards so bad, I spent (almost 2hrs) to straighten them up correctly with a sharp blade. What a waste. I put
  11. I read that has already been done. Has anyone given it a try? I bought an ATI FireGL X3 on Ebay for about $20 CAD to do so. Else than not being able to boot OS 9, would there be any other problem with using it on a 2001 QS? Will the screen show up only after booting? If anyone has anything to share about their experiences with this, please tell me. Thanks
  12. Makes sense to me. At least I can get a nice 1024x768 in 32-bit colors and switch between sizes. What I was hoping for.
  13. I don't have one for now. I should try, though! I changed my mind about recapping, since they all are surface-mount ceramic capacitors. At least I retried my sony 17" and horizontal bars are less visible and less frequent. The other problem seems to be gone.
  14. So i bought that Supermac thunder /24 (rom v3.00) to get better screen resolutions and to switch between them without having to play on the adapter switches. Pulled the 8•24 gc from my mac IIci and put the supermac instead. Works fine and has good image quality, except for the horizontal waves that show up occasionnally and half of the screen that sometimes move for a tick. I tried two other lcd displays, other apple multisync cables, reslotted it once and plugged it directly to the display(I use a display switcher). The waves are still showing up and the screen still moves sometimes.
  15. Update: Since my program wasn't working, I reupload it. This time, it includes equates, arithmetical expression processing for immediate data and more. Also, I made it as crash-proof as possible: I tried changing an 1.4 mb image's file type into TEXT and processing it with 2mb of RAM. It didn't crash. It can run with 32kb of ram if the file isn't too big, although I suggest at least 64kb. It is tested and runs on system 6.x, 7.x, 8.x, 9.0.4, and should run on 5.x and earlier. It also is Classic-compatible. The only problem is that it won't quit correctly on Mac Os 9.1 and 9.2, and
  16. Two months ago, after finding out that the RCA 1802 assembly never seemed to be ported to the mac, I decided to try creating one. And so, ASMac18 was born. All done in Fantasm6 68k assembler, I tried to use traps as least as possible, since I don't really know both the system and rom well. This is officially the first "real" program I have made that targets the Macintosh (my older programs targeted 8-bits CPUs). For now, the cross-assembler isn't high-level event aware, doesn't have any equates and can only assemble a single file at once. But, I won't say that equates are a big problem
  17. Thanks! I'll rebuild it when I will have the time. I thought it had to do with the resources, too.
  18. Thank you! I worked hard to figure out how to do it, so I really appreciate comments. I'll keep at it!
  19. My main machine is an upgraded Quicksilver G4, which I am using right now. With a 1.6ghz 7447A, a SATA card( with 10000rpm WD's), a Radeon 9000 and an usb card, it can handle youtube very well by using ClickToPlugin's HTML5 player in up to 480p, handle facebook and manage my ipod 4. It satisfies me :b&w: .
  20. Zanmato.sit.zipHi I just 'finished' my first 68k Macintosh program ever in assembly language, using Lightsoft LIDE 3(Fantasm 5) on my Macintosh IICI. It is no big deal, but as a 17 years-old mac user, I still am a bit proud. It is a simple dialog box that pops in front, tells stuff and asks for your name. After clicking the "GO" button, it closes and pops another dialog box that tells "Greetings,«Your name»!" with a "Thank you" button. It seems to work fine on my Mac IICI. It also works well on my powermac 7100 when booted up on a system prior to 8.6. But, on my Macintosh SE( and Plus
  21. Hi. I am posting here because of the fact that i actually have no idea of other places on the internet to post this. Altough it should be easy for others to answer, I have no idea about how to do what I want to. So, my question is about event filter functions like this one which is for modaldialog in pascal: function MyFilter (TheDialog:DialogPtr;var MyEvent:EventRecord;var ItemHit;integer):boolean; How do i declare it in ASM? I searched the whole lot of documentation i gathered to try to make myself an idea, still i can't. I am not really used to the toolbox yet, so any help/e
  22. I know that the revision B of my 8•24 gc with my IIci works with my vga 17' Lenovo lcd screen with the db-15 - vga adapter. The only resolution that works is 832x624. The revision A won't work as it doesn't support 832x624. I don't know if this is helpful as i don't have any idea about where to find an 8•24 gc.
  23. Ahhh, great memories. Makes me remember when i first discovered resedit. I had a special cursor that i made myself using and editing the "Color cursor" extension. Pictures, icons and cursor editing is so fun and creative.
  24. Looks like i can try that. Is there any incompatibilities between the two's ?
  • Create New...