Jump to content

Forums

  1. Important Information

    1. The 68kMLA Forum Rules   (10241 visits to this link)

      To quote vintage Apple manuals: "Read Me First!"

  2. Community Connections

    1. General 68kMLA News & Stuff

      What's going down in the barracks.

      3975
      posts
    2. Conquests

      Discuss your latest vintage Mac finds!

      39704
      posts
    3. Trading Post

      Feel free to trade all of your Mac goodies here with all honest intentions. The website provider assumes NO liability, so buyer beware! Please see this topic for more information.

      53550
      posts
  3. Projects & Hosted Forums

    1. RetroChallenge

      What can you do given only one month and strictly "retro" hardware? Find out with RetroChallenge!
      http://retrochallenge.org/

      1487
      posts
    2. 68kMLA Wiki

      The creation and maintenance of the 68kMLA's information repository.
      http://68kmla.org/wiki/

      511
      posts
  4. 68k Model Forums

    1. Compact Mac

      Macintosh, 512k, SE, etc.

      46607
      posts
    2. Mac II, Quadra & Centris

      Just think, having a Quadra 950 in 1992 would be like having a Mac Pro today… except with more slots, more expandability, and on-board SCSI!

      13323
      posts
    3. 68k LC & Performa

      Ah, the consumer computers!

      8023
      posts
    4. 68k PowerBook

      From the Portable to the 190cs.

      9972
      posts
  5. PowerPC Model Forums

    1. NuBus Power Mac, LC & Performa

      The NuBus architecture gets a new brain!

      2684
      posts
    2. PCI Power Mac & Performa

      The PPC comes of age and adopts the industry standard expansion slot.

      5925
      posts
    3. G3/G4/G5 Power Mac, iMac & eMac

      From the Beige G3 to the quad-core G5, via various iMacs!

      13771
      posts
    4. PPC PowerBook & iBook

      All that power in a laptop? Never…

      8998
      posts
  6. Everything Else…

    1. Apple I, ][, /// & Lisa

      Not really 68k Macs, but certainly Vintage!

      7420
      posts
    2. Newton

      The best PDA ever finally gets its own forum!

      1074
      posts
    3. Software

      Includes system stuff, productivity, emulation, design, and games for pre-OS X Macs!

      17540
      posts
    4. Hacks & Development

      Yes, it's back! Hardware hacks/modifications and software development for Mac OS.

      18956
      posts
    5. Peripherals

      Anything you can hook up to your Mac or stuff into it as an interface!

      14661
      posts
  • Posts

    • So I've been restoring a couple of WGS 9150s. One is an original (80mhz) and the other a 9150/120.   The 9150/80 was exhibiting these issues regularly: crashing with type 1, type 2, and type 3 errors after some usage internal video sometimes had random pixels of noise (in random colours) here and there occasionally the internal video also didn't work, just a black screen on boot   I figured this was all probably RAM related. I removed all the SIMMs and the problems were still there. So then I suspected its 8mb of DRAM soldered to the board.   At this point I decided I might as well replace the 18 electrolytic caps on the logicboard and give it a good clean. The insides were rammed with dust and fluff! I think this machine had sat on someone's floor for years just sucking in all the dirt. It was quite a gross job.   Anyway it's all clean and has shiny new caps installed.   Now it doesn't seem to crash any more, but I get no internal video on boot, just a black screen. My monitor (an NEC 1880FX) knows there's something there as it comes off standby when I boot the machine, but it never gets a full signal.   (as a side note - video works fine from a Nubus card)   Anyone got any ideas? I suspect one or more of the DRAM chips has failed... or something else?   I've searched for schematics in vain. Not sure where to go next diagnosing this.  
    • It’s probably a long shot but do you know if there’s any schematics out there for the LC 520 analog board? It’s a little hard to troubleshoot what’s going where without em.   I pulled the analog board out today and started testing capacitors with my ESR meter. Out of the 10 I’ve tested so far only one had an ESR reading that out of spec (and it was significantly out of spec, so maybe that’s part of the issue?). All the others were all in range. There’s 30+ capacitors on the board so I’ve still got a bit to go, but the bad one is definitely getting replaced.   I also double checked for cracked solder joints and I still don’t see any anywhere. Triple checked the flyback and surrounding areas and it’s all good. I’ll try hitting the pots with deoxit for good measure though.
    • I have a nice ratcheted RJ45/RJ15/RJ11 crimper as well.  I got it at WeirdStuff surplus for cheap.  I used it a lot when I worked at a different school campus, but my new work insists on buying molded ethernet cables.  I understand the paranoia, but, I did like crimping my own cables and using them.  Was pretty satisfying.   If I ever get my own house, I'll make PLENTY use of it wiring up ethernet and phonenet.
    • That's a cool hack.   Could also post at VCF.
    • Was able to rule out the monitor using a very hacky hack to get some signal directly to a separate VGA. I didn't know how to deal with the grayscale, so I just sent it to green -- and you can see the same pattern shown. So its something on the logic board. I guess I'll proceed with ordering some caps, and see if that fixes anything (but I doubt it)
×