I bought a Zulu SCSI board for my Powerbook 100 and have tried several downloads but always getting a flashing question mark. The only error I see in the l go file is something or other not contiguous. Has anyone had success with this arrangement? What is the secret I am mission. Very frustrating.
Zulu on Powerbook 100
- Thread starter Frederick
- Start date
Hi Frederick,
I'd try rebuilding the disk image using a utility such as Disk Jockey - it sounds like the image you have on the SD card is not stored or saved in an adjoining file (aka contiguous).
I'd try rebuilding the disk image using a utility such as Disk Jockey - it sounds like the image you have on the SD card is not stored or saved in an adjoining file (aka contiguous).
Put the attached zuluscsi.ini file on the SD card. It contains a required setting to be compatible with the Mac Plus, Portable, and PowerBook 100.
(Note: I guess .ini files are not allowed to be attached to this forum. After downloading, rename the file by removing the ".txt" I added to the end of it.)
