Stripped all the HDDs out of the MDD'03, got it booting from OS9Lives Installer and hit another dead end. 
For now anyway: Drive Setup says my 128MB mSATA SSDs are unsupported
1) Tried one with SATA adapter on new PATA/SATA card, not surprised it didn't work out of the gate
2) Tried another with PATA Adapter on MDD's Master and Slave connectors, still not supported
So I'm looking to build a Utility Suite on Zip 200 (maybe even 100?) to run under boot from any Optical Media Installer.
_TattleTech's a no-brainer
_is there a Memory Test Utility I should look for, getting an error at startup, but everything runs fine so far.
FWB guy from day one, but would appreciate other recommendations for mSATA formatting; Silverlining?
Anyway, thinking that assembling utilities as such would be useful all around?
Maybe upload it to the Garden? With iOmega guest on a floppy, Zip100, suites for OS 7x, 8.x etc might also be useful?
For now anyway: Drive Setup says my 128MB mSATA SSDs are unsupported
1) Tried one with SATA adapter on new PATA/SATA card, not surprised it didn't work out of the gate
2) Tried another with PATA Adapter on MDD's Master and Slave connectors, still not supported
So I'm looking to build a Utility Suite on Zip 200 (maybe even 100?) to run under boot from any Optical Media Installer.
_TattleTech's a no-brainer
_is there a Memory Test Utility I should look for, getting an error at startup, but everything runs fine so far.
FWB guy from day one, but would appreciate other recommendations for mSATA formatting; Silverlining?
Anyway, thinking that assembling utilities as such would be useful all around?
Maybe upload it to the Garden? With iOmega guest on a floppy, Zip100, suites for OS 7x, 8.x etc might also be useful?
Last edited:
But it doesn't work anyway at this point, there seems to be no Zip Driver available?
