Yellowing PBG4 screen...

[galgot]

Was in the process swapping the 1440x900 screen form a PBG4 17" with a 1680x1050 screen from PBG4 17" HR wreck , all went fine … but i noticed some yellow tint on the screen borders, changed the desktop to plain white , and indeed :

:-/  (don't mind the tape , it's there to keep the screen in place while testing)

Looks a bit like the 180s tunnel syndrome, but in yellow...

Anyone have seen this before ? And can it get better if I leave it running for a while… ?  

 

[TheWhiteFalcon]

Could just be a damaged panel.

 

[galgot]

yes.

After careful inspection , found there was also dust and crap in between the transparent plastic layers...

I've swapped back to the original 1440x900 screen.

 

[Elfen]

I've heard of this happening when somebody using ammonia to the screen and the plastic surface yellowing as a result. But the entire screen, not the edges like in yours unless they only wiped down the sides.

 

[galgot]

Yes maybe... Or it's the backlight starting to fail. Like on old Pismos screen , they get a pink tint.

Too bad, 1680x1050 is really nice on these 17". Will have to find another one.

 

[TheWhiteFalcon]

Did you swap logic boards too? The HR panel doesn't work with the LR

 

[galgot]

No, I kept the HR inverter board with the 1680x1050 for this testing.

 

[techknight]

Smoker's screen. Thats what happened there. In all displays, there is a little bit of UV yellowing down at the bottom where the CCFL is. 

But the whole screen yellowing = smokers delight.