Which other Macs have suitable GLU chips for the SE/30?

[smrieck511]

Need to find another one the cheapest way possible. Thanks for any help.

 

[finkmac]

iisi i think. are you SURE your glu is busted?

 

[Callan]

You can get them off iici and iicx boards too. I believe the Mac ii series glu s the same, but not 100% on it.

 

[robin-fo]

The GLUE is only in the II, IIx, IIcx, SE/30 and a certain variant of the LaserWriter II.

Sure yours is damaged? This is the most valuable part on the logic board! (Or why are you asking?)

The GLU is a very different chip and not compatible.

 

[croissantking]

The GLUE is only in the II, IIx, IIcx, SE/30 and a certain variant of the LaserWriter II.

Sure yours is damaged? This is the most valuable part on the logic board! (Or why are you asking?)

The GLU is a very different chip and not compatible.

Apple sometimes refers to the GLUE as GLUCHIP. Here’s a photo of a IIcx logic board:



Which is the other GLU you are thinking of?

 

[smrieck511]

iisi i think. are you SURE your glu is busted?

absolutely not sure but it's my best theory at the moment because it had a good deal of corrosion when it came off the bombed board. Pins were OK and it cleaned up ok. Wouldn't hurt to have another if I can pick up a iici or whatever relatively cheap.

 

[croissantking]

absolutely not sure but it's my best theory at the moment because it had a good deal of corrosion when it came off the bombed board. Pins were OK and it cleaned up ok. Wouldn't hurt to have another if I can pick up a iici or whatever relatively cheap.

It’s very hard to kill a Glue chip…

I’ve lifted one off a heavily bombed board and after cleaning the pins it worked fine.

I’ve used lots of hot air to move them around and it’s been fine.

I’ve also installed one rotated 90 degrees off and it still worked after correcting my mistake.

In the latter situation I was convinced I’d damaged the chip but it turned out not to be the case and to this day it lives on providing much needed vintage happiness.

So I’d suspect it’s fine.

I could be wrong.

But it’s probably fine.

 

[smrieck511]

It’s very hard to kill a Glue chip…

I’ve lifted one off a heavily bombed board and after cleaning the pins it worked fine.

I’ve used lots of hot air to move them around and it’s been fine.

I’ve also installed one rotated 90 degrees off and it still worked after correcting my mistake.

In the latter situation I was convinced I’d damaged the chip but it turned out not to be the case and to this day it lives on providing much needed vintage happiness.

So I’d suspect it’s fine.

I could be wrong.

But it’s probably fine.

that is excellent to know. Thank you for that info.