• Hello MLAers! We've re-enabled auto-approval for accounts. If you are still waiting on account approval, please check this thread for more information.

USB Serial Adapters

M

macgreg

6502
Hi All,

In my ongoing mission to get my Newton 2100 talking to my PowerBook G4 (running 10.4 no Classic), I purchased a second-hand Belkin USB Serial Adapter (F5U114-MAC). It is the one with two DIN-8 ports. Now it appears Belkin have 8.6 and 9.x drivers, does anyone know if they have OS X drivers?

Cheers [:)] ]'>

 
No idea. But if you go to the System Profiler and look for the USB device it should tell you what the chipset is (alas, a company like Belkin probably had the vendor and product ID written with their own data). Then you search for a third party drive.

At least that is how I managed to get drivers for my no-name unit.

 
After some further investigation, it looks like it is only supported on OS X under Classic mode. Guess I will have to install a Classic environment...

 
I have considered Ethernet but I have never been able to get a Newton compatible PCMCIA ethernet card... Would be much easier though.

Cheers [:)] ]'>

 
I have considered Ethernet but I have never been able to get a Newton compatible PCMCIA ethernet card... Would be much easier though.
Click to expand...
The 3Com 3C589 is as common as dirt and you should be able to get one on eBay for about £5. In fact all of the Newton-compatible ethernet NICs look pretty commonplace.

 
It's infuriating how you never have all the bits you need to do something cool like getting a Newton online though - I found one of those 3com cards ages ago (it was in that dead ThinkPad that I got given), but the little dongle for turning the flat connection on it into a normal connection doesn't seem to work, and I also really need a Newt power adapter as the batteries I put in it died pretty quickly, and the backup battery in is dead too! > :( I'd probably never be able to work out how to get it online anyway, even if I had all the bits :(

 
Bit of an update...

Just secured on eBay a working 3Com 3C589D PCMCIA Ethernet Adapter.

I already have one of these (with a busted up dongle) and this one comes with 2 working dongles so with any luck I will end up with 2 working setups.

According to this page these cards should work with my Newton 2100. Does anyone else have specific experience with this card on a Newton? Will it work on a 120 (OS 2.0) or am I being a tad optimistic?

Cheers [:)] ]'>

 
Hi All,
In my ongoing mission to get my Newton 2100 talking to my PowerBook G4 (running 10.4 no Classic), I purchased a second-hand Belkin USB Serial Adapter (F5U114-MAC). It is the one with two DIN-8 ports. Now it appears Belkin have 8.6 and 9.x drivers, does anyone know if they have OS X drivers?

Cheers [:)] ]'>
Click to expand...
I can definitively tell you that the Belkin adapter does not have any OS X drivers...I shelled out the $$$ before OSX for one, and I was fairly upset when they never supported it. I later shelled out the bucks for a Keyspan adapter, and their support has been very good.

 
i have only just been thinking about such things..

so if these things need drivers, then any chance of getting one of these serial adapters to work on a ibook running linux is pretty much not going to happen then?

hmm.. shame..

 
You must log in or register to reply here.

Similar threads

gsteemso
Geethree G4+ “Stealth Serial Port” PCI slot bracket
2
Replies
28
Views
1K
Chopsticks
C
indibil
Power Mac 6500 USB and ethernet cards
2
Replies
32
Views
2K
croissantking
croissantking
larsove
KEYSPAN USB to Serial adapter G3 PowerBook
Replies
5
Views
954
larsove
larsove
D
OS 9 driver for Sil 3114 SATA Card?
Replies
0
Views
643
dv-
D
M
My 2.4GHz mouse doesn't work on Mac OS 9.
Replies
1
Views
734
s_pupp
s_pupp
Back
Top