Yeah. I just wish I knew how to better cope with it. Its weird, it seems the older I get, the more I "feel" like I am losing control.
-
Hello MLAers! We've re-enabled auto-approval for accounts. If you are still waiting on account approval, please check this thread for more information.
talk about stress... not sure what’s next
- Thread starter Slammbone1986
- Start date
Does diving into computers and such, like you said a hobby, not help? You can try doing YouTube videos on different kinds of electronics or what not. I found your videos on the portable very informative and was scrolling through your channel hoping you had more!!
It did for awhile. years in fact. But then after awhile, it gets old and all the motivation goes away.
@techknight - I've been there as well. It's a long road, but things can and will get better.
I can empathize with where you are at. What helped me was not internalizing how I felt, but talking about it with wife, friends, etc. Knowing that other people knew, and cared, and were willing to cut me some slack when things weren't going well really helped in the long run. If you have folks you can open up with, give it a try.
I can empathize with where you are at. What helped me was not internalizing how I felt, but talking about it with wife, friends, etc. Knowing that other people knew, and cared, and were willing to cut me some slack when things weren't going well really helped in the long run. If you have folks you can open up with, give it a try.
All I have is the internet. I don't have any family at least none that care. (all drug addicts on my mothers side, father disappeared out of my life when I was 16). not married no kids, etc.
Last edited by a moderator:
It appears to me you have a lot of people on here that care. I know it’s the internet and all, but You have ya!! What state do you live in?
Nice I just moved back to Atlanta from Charlotte with the airlines. I got let go on American and now living back in Atl where I’m from.
Well I got the machine to boot like I said. The Hard disk is hit or miss. Was working last night and now it’s not either way I get it to boot on a disk I have and this is what comes up. Also I took a picture on the board where it looks a little suspicious. What y’all think? Previous owner used the PB power supply for a few years before everything quit and I purchased it.
Last edited by a moderator:
Yea thats what happens if someone runs it off of the power adapter and not the battery. that transistor is probably bad and will need replaced.
The power level issue could be a bad trace between the PMGR and the power regulator section by the two buttons on the lower left corner of the logic board
matter of fact, one of the caps I believe leads to a resistor which leads to the battery level detect lead on the PMGR IC. so if you missed a trace when rewiring the capacitor after the pad lifting, youll get this same error.
The power level issue could be a bad trace between the PMGR and the power regulator section by the two buttons on the lower left corner of the logic board
matter of fact, one of the caps I believe leads to a resistor which leads to the battery level detect lead on the PMGR IC. so if you missed a trace when rewiring the capacitor after the pad lifting, youll get this same error.
Gotcha yeah do you recall which cap it is? Cuz I didn’t do such a good job on the one all the way to the right, farthest from the buttons. So that transistor (Q1) will go bad is run with the 2.0 amp charger for too long?
I think I dorked up C26
And thats the one thats partially responsible for getting the battery level signal back to the PMGR. Look at the schematics for the M5120 non-backlit. it lables the pinouts for the PMGR IC, they are the same between the two machines. Find the lead for the ADC, Battery level, and trace it back to that stage. youll probably find an open connection.
Last edited by a moderator:
Don’t see a line named that on the schematic. The only thing close I see is PMGR ADB on pin 41. Could they be the right one?
If you look st the next page Hybrid/power supply. There are some lines named battery sense and power supply....etc not too sure if that is related to what I’m looking for
That’s also the same page where I found the C26 cap but it’s connected to the hybrid chip. Which on my board is much smaller than what’s on the M5120 schematic. So I’m too sure how to read what’s going on.
Repaired all the Caps and lifted pads and still getting the same message. I can’t make heads or tails of the schematic for the non back-lit. The PMGR is the same (i think). But there is no hybrid chip on my board instead a much smaller op-amp is labeled U1M. Are there any schematics floating around for the 5126? Because I can’t trace the AD line back from the PMGR especially if I have broken traces. I’m not even sure if the pins on the PMGR are in the same location.
Hear, hear! I'd love a set right about now as well. Seems that they don't exist in the wild; Techknight says he doesn't know of any, and if he doesn't, then they're buried deep somewhere
Last edited by a moderator:
Maybe in apples old archives that got donated to some library somewhere maybe.
Yeah until then I’m dead in the water with this battery issue.
