Ok, here's where I am. What's the easiest way to swap one monitor for another? Seems almost impossible considering the monitor is attached to a board that doesn't look like it will just slide out. Anyone have instructions for such a swap?
-
Hello MLAers! We've re-enabled auto-approval for accounts. If you are still waiting on account approval, please check this thread for more information.
Swapping Monitors On A LC 575
- Thread starter Guybrush3pwood
- Start date
The info you seek is here, unless you already have gone thru it: http://tim.id.au/laptops/apple/legacy/lc_520.550.575.pdf
This is also a great write up of the experience: http://appletothecore.me/files/mac_tv_restoration.php
This is also a great write up of the experience: http://appletothecore.me/files/mac_tv_restoration.php
If you want to swap just the CRT (tube) you need to:
If you want to swap the whole video system, you only need to get the corner bolts and slide the video board straight back out. You can leave the neck board and the anode attached to the CRT.
It would probably be easier to just swap the logic boards at that point though
Be super careful with the CRTs themselves. They're heavy and their necks are fragile. Once you let the genie out it'll never show video again.
- unscrew the Torx-bolts at each corner (T-15? T-20? I can't remember, sorry),
- get the anode (the thing under the "suction cup" at the end of the thick red wire) disconnected... make every effort not to kill yourself with this step (search for details)
- gently pull the board straight back off of the neck of the tube
If you want to swap the whole video system, you only need to get the corner bolts and slide the video board straight back out. You can leave the neck board and the anode attached to the CRT.
It would probably be easier to just swap the logic boards at that point though
Be super careful with the CRTs themselves. They're heavy and their necks are fragile. Once you let the genie out it'll never show video again.
Thanks guys! I was actually able to do it on my own by moving the board and monitor at the exact same time very, very carefully. It worked!
