http://www.amiga-stuff.com/hardware/mc68030.html
https://www.nxp.com/docs/en/reference-manual/MC68030UM.pdf
https://www.nxp.com/docs/en/reference-manual/M68000PRM.pdf
Was thinking about socketing the proc in my /30 and discovered I didn't need to.
Found a set of four 68030 sockets for $14 on eBay,. The pinout/count's all wrong unless they're meant for an embedded version, but they look like they might work if I add three machine pin sockets on the inside corners.
Before I crack eleven hundred some pages of PDF, I thought I'd ask about a ludicrous WAG.
With the IIfx ROM SIMM on board, might the SE/30 be hoodwinked at the socket level into supporting all, most, one or another (additional) of the six possible NuBus Slot IDs its ROM/Architecture doesn't support as is? [}
] ]'>
https://www.nxp.com/docs/en/reference-manual/MC68030UM.pdf
https://www.nxp.com/docs/en/reference-manual/M68000PRM.pdf
Was thinking about socketing the proc in my /30 and discovered I didn't need to.
Found a set of four 68030 sockets for $14 on eBay,. The pinout/count's all wrong unless they're meant for an embedded version, but they look like they might work if I add three machine pin sockets on the inside corners.
Before I crack eleven hundred some pages of PDF, I thought I'd ask about a ludicrous WAG.
With the IIfx ROM SIMM on board, might the SE/30 be hoodwinked at the socket level into supporting all, most, one or another (additional) of the six possible NuBus Slot IDs its ROM/Architecture doesn't support as is? [}
] ]'>
