-
Hello Guest! We're hosting a challenge to welcome vintage Intel macs to the MLA during the month of July! See this thread for more information. -
We've made some quality of life improvements to the Trading Post. More info here.
Rescued what I thought was a Mac II
- Thread starter ClassicGuyPhilly
- Start date
Right on! I like to keep my peripherals period-correct to the system. I will say all those Brits who keep showing off their Kensington Turbo Mice will eventually make me get one for the IIfx!
Haha, I went overboard with those turbo mice. I have three of the 5.0, three of the 4.0, and one of the 3.0s.
The problem with them is... I keep forgetting and turning it upside down.
That's a terrible affliction that only has one cure...send the Turbo Mouse to me!
I told it too, but it doesn't seem to be listening to me.
I just found out about this thread. I seriously envy you. I'm aspired to rescue stuff again, but every opportunity I have doesn't seem to work out. ;_;
Sometimes it's just a case of coming back to things. If I'm struggling with a machine I put it to one side and come back to it when I have new ideas, or even skills
Any failed repair is just more project opertunities. Besides, working on them is the fun bit. It's always harder to work out what to do after they're finished!
The man of the hour himself, ladies and gents!
Will keep the 4MB SIMM. Any PBX updates?
And thank you very much @alectrona2988 !
Hmmmm...Mouse must be part cat!
haven’t messed with it short of removing all the screws. Need to fire it up, but VCF East stuff comes first!The man of the hour himself, ladies and gents!
Will keep the 4MB SIMM. Any PBX updates?
And thank you very much @alectrona2988 !
Another good choice for a period correct setup... M1298 and M0116, with the correct A9M0331 mouse.
Very nice looking IIfx system you have there @volvo242gt
Likewise, @ClassicGuyPhilly.
Many many thanks to @chiptripper for his repair of the battery bomb-damaged 4MB RAM sticks that came with my IIfx! She's now zipping along with a healthy 20MB's
I think it's so cool how this machine has become a little 68kMLA group restoration project. Next I need to replace the floppy drive cogs with 3D printed ones from @Torbar She's come a long way since @ilitch64 did the logic board resto!
And of course all the great advice and encouragement from those on this thread...thank you all!
Similar threads
