Replacing the RP9 IC on Mac SE/30

[MegaImg]

So the RP9 is a Boruns Inc. 4816P-T02-201 that is imposible to get if you are willing to get 2000 of them. Anyone has try to replace it with 4816P-T02-221LF.

The Diference is the is that the Original is 200 Ohms and the new one I am looking is 220 Ohms.

Any Suggestions.

 

[MegaImg]

So the RP9 is a Boruns Inc. 4816P-T02-201 that is imposible to get if you are willing to get 2000 of them. Anyone has try to replace it with 4816P-T02-221LF.

The Diference is the is that the Original is 200 Ohms and the new one I am looking is 220 Ohms.

Any Suggestions.

Anyone, comments?

 

[Bolle]

Anything from 200 to 1k ohms will work just fine so you're good with a 220ohms part.

 

[MegaImg]

Anything from 200 to 1k ohms will work just fine so you're good with a 220ohms part.

Thanks! Great SE/30 Logic board Replacement by the way!