Powerbook 100 Battery

[Frederick]

I'm building a battery for my newly revived PB 100. The components I have picked are two Lithium pouch cells, a BMS board and a regulator module. I have designed and 3d printed a shell in ABS. My total cost will be approximately $45. After I have the battery completed I will post photos.

 

[finkmac]

LiPo/Li-ion or LiFePO4?

 

[Frederick]

LiPo/Li-ion or LiFePO4?

2 flat LiPo pouch cells in series with a 2S Li-ion/LiPo BMS, then regulate or limit the output as needed.