Just ordering caps for something else, trying to make it more worth the cost. Thanks!
portable power adaptor cap list
- Thread starter imactheknife
- Start date
Mine had 4 caps on the secondary side: https://tinkerdifferent.com/threads/portable-adapter-m5136-capacitor-list.1199/
I also replaced the primary filter cap, but yeah it may not be necessary.
I also replaced the primary filter cap, but yeah it may not be necessary.
Perfect, thanks
Thanks Steve, appreciate it
Can I add the image of this to the cap reference section on my website?
www.macdat.net/cap_reference.html
Thanks! I'll get it up with the next site update.
It's glued together and needs to be cracked open, can be done relatively cleanly (pics from my PB100s PSU):
Hi all,
I just wanted to revive this thread with something I’ve been working on for the Macintosh Portable CR-76E / M5136 power board.
I’ve recreated the original power PCB as a 1:1 drop-in replacement for the Sony CR-76E board, and made the design available on GitHub here:
https://github.com/daanvdl/macintosh-portable-cr76e-powerboard
That repository includes:
Cheers,
Daan
I just wanted to revive this thread with something I’ve been working on for the Macintosh Portable CR-76E / M5136 power board.
I’ve recreated the original power PCB as a 1:1 drop-in replacement for the Sony CR-76E board, and made the design available on GitHub here:
https://github.com/daanvdl/macintosh-portable-cr76e-powerboard
That repository includes:
- A recreated PCB you can use to replace a damaged or leaky original board.
- The complete reverse-engineered Bill of Materials (BOM) for the board — useful if you’re planning to populate or order parts.
Cheers,
Daan
