Recapping a portable, it happened to have the backlight upgrade installed. I did a thing to it, but hopefully this may help others. My dwell time was too long, I hadn't added enough new solder, so it suffered some delamination and a lifted pad. I need to know a reasonable value for L1, I'm not able to measure it.
C10 and C11 are both 470uF 25v caps.
Attached are scans of the front and back of the depopulated board, oooh, ahh.
C10 and C11 are both 470uF 25v caps.
Attached are scans of the front and back of the depopulated board, oooh, ahh.
