Mac SE/30 caps (need tantalum dimensions)

[Alex]

Hi

Does anyone have the tantalum dimensions that I should purchase? I just got an SE30 logic board and want to start removing the old caps and replacing them with tantalums. Would appreciate anyone's help. I only need info for these two:

1 - 1µf - 50V - SMT

10 - 47µf - 16V - SMT

Source: http://www.maccaps.com/MacCaps/Capacitor_Reference/Entries/1989/1/19_Macintosh_SE_30.html

Thanks!

 

[Realitystorm]

Had the same issue, finally tracked it down:

1uf are: 0.138" L x 0.110" W (3.50mm x 2.80mm)

47uf are: 0.236" L x 0.126" W (6.00mm x 3.20mm)

 

[Alex]

You're a life saver! Thanks a million, I was unable to find this using any of my favorite search engines.

 

[itdude99]

Howdy. This is my 1st post, yay!  I am new to soldering and I have never ordered cpacitos before.  Does anyone have an idiot proof list of caps I can order. I want the tantalum ones and I just acquired an SE,SE/30 and Classic ii (might have another SE on the way). So far only one SE works but I might as well order the caps now. 

Thanks in advance,

Jim