LCIII rebuild - recommendations welcome.

[VMSZealot]

I have an LCIII logic board (working), an LC PSU (unbranded, not working, but I'll have a crack at getting it going again, or rig up a new supply using its molex connector), floppy and an empty case, but I'm missing most other parts (including the floppy drive cable). Are there any particular fans that people recommend (silent as possible is what I'm thinking - it'll have an SSD in it, so the fan is the noisiest part), or speaker (better fidelity and more volume would be nice), still fitting in the same size.

All thoughts gratefully received.

 

[Nixontheknight]

If you want a good PSU for the LC, I recommend the mAcTX LC, it uses a picoATX and generates all the voltage rails the LC needs on the LC’s connector. You can buy SCSI cables online and I can ship you a spare floppy cable I took out of a Macintosh classic if you want it

 

[VMSZealot]

Thanks for the tip. Is there a link to mAcTX LC?

 

[Nixontheknight]

Thanks for the tip. Is there a link to mAcTX LC?

I can’t seem to find a link, but hopefully somebody can either provide a link to an assembled one or to a Gerber file so you can make one. But for the picoATX, it’s on Amazon

 

[Juror22]

It was in the hacks forum.