Just bought some ANS locks and keys:

[dschnur]

I snagged all of them. I'll have extras, but my goal is to rebuild a Quadra 950 lock which is missing they key since these use the same keyways.

Vintage Apple Key Switch NOS 3-Pos Panel Mount Lock – Qty 1 | eBay

Optional case latch tab on the cam. Panel mount with nut and lock washer. Three-position switch.

www.ebay.com

I'll have extras and you know how much I paid, so if anyone wants one, send me a message. I should have them in a week or so.. give or take.

 

[Jarema]

PM

 

[powermacintosh]

I sent you a message if you still have any switches. Thanks!

 

[Durosity]

How are you planning to rebuild the 950 lock? I have a 950 but with the wrong key, so I’d love to know how you accomplish this and see if I can replicate it!

 

[dschnur]

How are you planning to rebuild the 950 lock? I have a 950 but with the wrong key, so I’d love to know how you accomplish this and see if I can replicate it!

So, the long and short is this. The lock is assembled at the factory and cannot be re-keyed without destroying it.

Post a picture of the key you have. I *might* be able to get another 900 series lock without a key and I know what the one it uses looks like. Also, post the key number. It's on a tag connected to the wire on the lock.

 

[eharmon]

How are you planning to rebuild the 950 lock? I have a 950 but with the wrong key, so I’d love to know how you accomplish this and see if I can replicate it!

Just in case you happen to have it, I'm looking for N019.

 

[dschnur]

Just in case you happen to have it, I'm looking for N019.

I'm out of them, but have some ongoing searches in the usual places. If I find any more, I'll make sure to tell you.

 

[defor]

I find that re-keying the quadra locks is pretty trivial- at the end of the day, we're not super-worried about security, pull the core and then just find a single pin or two from your starting lock that matches the donor key, and reassemble- you can leave out the other pins.