-
Hello MLAers! We've re-enabled auto-approval for accounts. If you are still waiting on account approval, please check this thread for more information.
i feel like i've tried everything with this quadra 605. replaced psu, recapped, re pram batteried, iso bath to clean corrosion, still error chime.
- Thread starter civil35
- Start date
My first guess would be bad RAM, try reseating first and then replacing if that doesn’t work. The fact that it chimes first suggests that most of the system is working, and my guess would be that after that the RAM or VRAM test fails before any display output stage can be reached.
Or a bad SIMM socket. You could always try reflowing the pins on it, from the bottom.
Onboard ram chip could be bad too.
How bad were the leaky caps?
Try slighty bending back the pins on the SIMM-socket, this has happened on a few of my machines and caused the above problem. Try also testing the module in another machine so you are sure the module is ok. Otherwise it can of course be the on board ram which is bad. Have you started the machine with no ram in the simm? That would be my first test otherwise 
was there any leaking caps near onboard ram or rom?
Similar threads
