Floppy Emu Atari Cartridge Case

[3583Bytes]

I love my Floppy Emu from BigMessOWires.com.  Specially he hard drive emulation mode.  However it always bothered me that it did not have a case.  I hopped that someone would at some point post cool retro design for a 3D Printer but so far no luck.  So I decided to make my own.  I wanted to be retro so I went through all my non working retro junk and settled on a broken Atari Cartridge.  It requires some cutting so the screen shows but it fits in.  Here are the pictures of how it looks.



I am still hoping one day to run into a broken Apple Floppy or something to convert into a case, but for now it will do.

 

[markyb86]

That doesn't look half bad, actually!

 

[Instow]

That does look quite cool, can you see the lights on the board? Can't see if you've made holes for access to the buttons.

BMOW do offer a case for the EMU (I have one), works well, third item down, but currently out of stock:

Universal Case for Floppy Emu Model A or B, Clear Acrylic, $18

 

[3583Bytes]

Thanks,

The board is covered, I have not added holes for the buttons but I probably will at some point.  I just leave it In Hard Drive mode so I rarely use the buttons.

I am aware of the Floppy Emu case but I wanted something "Retro".  

The best would be a 3D Printed case in the shape of a floppy drive like this SD Card solution for the Commodore 64:

http://www.thefuturewas8bit.com/shop/commodore/sd2iec-be.html

 

[bigmessowires]

That is awesome! Nice work.

 

[techknight]

The best would be a 3D Printed case in the shape of a floppy drive like this SD Card solution for the Commodore 64:

http://www.thefuturewas8bit.com/shop/commodore/sd2iec-be.html

Aww... its so cute!