Classic Mac as Serial-connected Terminal?

[cocoadelica]

Hey all,

I'm thinking about using a Classic Mac running MacTerminal (or similar) with the mini din-8 serial port adapter-d to an RS-232 port which is in turn adapter-d to USB.

I think I can then bring this in to a TTY device on a 10.x running MacBook and send the terminal output to it.

Has anyone seen/done similar? 

Any total blockers?

 

[cheesestraws]

Nope, it's pretty easy.  I'm doing exactly this with my eMate, actually, as a console onto a switch, but I did it with a PowerBook previously onto a Linux box.



Only thing to be aware of is the usual serial stuff about making sure that the Tx/Rx lines are swapped in the cable and/or using an adapter that will swap them for you, since at least all my 8-pin to RS232 leads are straight-through wired.

 

[cocoadelica]

Nice!! Now I just want to do it with an eMate

Thanks for the positive support.

 

[cheesestraws]

Now I just want to do it with an eMate

It's the most incongruously cute emergency network equipment console I've ever seen, I must say.

 

[Crutch]

Believe this DIN8 to DE9 adapter switches the wires for you so is a proper prefab Mac-to-RS232 cable. I bought one in January to get an arduino talking to me SE30 over serial, works great. 

 

[Dog Cow]

Hey all,

I'm thinking about using a Classic Mac running MacTerminal (or similar) with the mini din-8 serial port adapter-d to an RS-232 port which is in turn adapter-d to USB.

Any total blockers?

I recommend FreeTerm 2.0 for the terminal emulator, or ClarisWorks 2.1v3 if you've got a newer Mac. The hardest part is making the cable, but if you get a KeySpan USA-28X adapter, you can use a standard Apple printer cable.