Box full of ZIF processors

[Mike Richardson]

There's only a few G4 450 MHz processors. Tons of G3 450 MHz though. I'm going to hold on to them for now. If you're interested I'll send two G4 400s for $35.

 

[madmax_2069]

i even tried a G4 zif from a Yikes G4, it works but gets detected as a 604 CPU and shows half of the L1 cache and no L2 cache. i tried most of the CPU/cache enablers and all would cause the system to crash on bootup. with the CPU running like that everything ran uber slow. i did wish i could have gotten this to work out.

but my AIO is in my sig, parted out and in storage :'(

You needed to do the B&W Firmware update from a 3rd-party CPU upgrade maker. It was essentially a modded Yikes! Firmware.

i was talking about my Beige G3 not a B&W, i dont think you could use the firmware update like that on a Beige G3.

 

[chris]

A G3/450 would be nice for my pimpin' beige desktop... Have any tested, and would they work in a desktop beigey? 83mhz bus means it would run at a cool 500mhz at least (technically an underclocking - the proc speed setting is the same for 500mhz at 83mhz as 400mhz at 66.)

 

[Mike Richardson]

Will test in a beige today.

 

[Bunsen]

If you're interested I'll send two G4 400s for $35.

OK, just to confirm: that's US$35 for the pair, shipped to Australia, no heatsinks?

SOLD!!

 

[Mike Richardson]

If you're interested I'll send two G4 400s for $35.

OK, just to confirm: that's US$35 for the pair, shipped to Australia, no heatsinks?

SOLD!!

Yes. PayPal to mike@silvernetworks.net (no credit card)

 

[Bunsen]

Paypal sent Mike, thanks