ADTPro help

[mcdermd]

If you use a Super Serial Card, the easiest connection is to move the block on the card to the "Terminal" position and use a straight-through serial cable. I routinely use 19.2 but remember pulling it back to 9600 sometimes. For boot strapping, you may even want to try setting it lower - 1200 or so.

EDIT: the ADTPro page actually suggests setting the card to 300 baud for bootstrapping:

http://adtpro.sourceforge.net/connectionsserial.html

 

[Cosmo]

I was trying first to the get the //c working with ADTPro. I think it was set to 9600, i'll go lower and see if that helps.

If no dice with that, i'll try with the ][e next. Only cable available for that i have currently is DB25M-DB25M -cable.

Might get one DB9F-DB25M later on from a friend.

 

[david__schmidt]

115.2kbps should work, even with a ROM0 //c. It's your cable.

 

[Cosmo]

For some reason i have no luck even with Apple ][e with Super Serial Card II setup as terminal and using straight-through serial -cable.

Luckily i have three cards so i can test an another.

 

[Cosmo]

I went ahead and ordered the CFFA3000-card. Let's see when i get that.

 

[olePigeon]

I'd be interested in how it works for you, I'm interested in getting one myself.

 

[Cosmo]

If you want one, be quick. The second batch of 500 is running out..

http://dreher.net/?s=projects/CFforAppleII&c=projects/CFforAppleII/main.php

Order status:

http://dreher.net/?s=projects/CFforAppleII&c=projects/CFforAppleII/orderStatus.php