Hard Disk Image for an iMac G3 DV 400 on MacOS 9.2.2?

E

Elate

6502
I have an iMac G3 DV 400 (Slot-Loader) that I'm trying to repair, next thing I plan to do is recapping the PAV board. But the DVD-ROM drive doesn't really work, just makes a loud mechanical noise when you insert something, and doesn't try pushing it inwards, nor does it give me a way to eject it once I manually push it all the way in, so a MacOS installation CD is a no-go.

So, is it possible to prepare the SSD on my Windows PC with a hard disk image I can flash to it so I have no need for a installation disc? Unsure if external USB DVD drives work, and FireWire external DVD-players are a bit too expensive for me due to scarcity, shipping, and import taxes.
 
Elate said:
I have an iMac G3 DV 400 (Slot-Loader) that I'm trying to repair, next thing I plan to do is recapping the PAV board. But the DVD-ROM drive doesn't really work, just makes a loud mechanical noise when you insert something, and doesn't try pushing it inwards, nor does it give me a way to eject it once I manually push it all the way in, so a MacOS installation CD is a no-go.

So, is it possible to prepare the SSD on my Windows PC with a hard disk image I can flash to it so I have no need for a installation disc? Unsure if external USB DVD drives work, and FireWire external DVD-players are a bit too expensive for me due to scarcity, shipping, and import taxes.
Click to expand...
I had similar problems a while back here's my technique for force ejecting CDs:

Snial

Post in thread 'G3 iMac ate a CD...'

mmmlinux said:
Sounds good, just wanted to make sure there wasn't some secret way to get the disk out. its burned so i don't care if i damage it. Anyone know if the late model iMacs will boot off a firewire dvd drive?
Click to expand...
You may have already solved the problem, but this is what I've found, with the iMac G3 DV/400 slot loader I have: you need two credit/debit cards! You slide one into the slot so that it goes just under the CD (and you can feel when it does this, because you can feel when the card hits the cd and then you can angle it under). Then you slide the second in just above so that it slides...

I fixed a broken CD-RW drive in an iMac G3 using rubber bands:

Snial

Post in thread 'No Go Snow iMac G3!'

OK, slight update: I've managed to get the slot-loading CD drive to eject. I took the CD drive apart. I found the rollers were loose, so I first tried to glue them to the metal bar with superglue, but it didn't seem to work very well. Later I used rubber glue from a puncture repair kit, which seemed to be better. Neither is particularly easy, because pushing the rubber roller back onto the metal bar tends to push the glue out of the way, so I spun the roller as I pushed it on: I squeezed each roller to the bar for 5 minutes as I would with a normal puncture repair.

I then put the iMac...
 
Snial said:
I had similar problems a while back here's my technique for force ejecting CDs:

Snial

Post in thread 'G3 iMac ate a CD...'

mmmlinux said:
Sounds good, just wanted to make sure there wasn't some secret way to get the disk out. its burned so i don't care if i damage it. Anyone know if the late model iMacs will boot off a firewire dvd drive?
Click to expand...
You may have already solved the problem, but this is what I've found, with the iMac G3 DV/400 slot loader I have: you need two credit/debit cards! You slide one into the slot so that it goes just under the CD (and you can feel when it does this, because you can feel when the card hits the cd and then you can angle it under). Then you slide the second in just above so that it slides...

I fixed a broken CD-RW drive in an iMac G3 using rubber bands:

Snial

Post in thread 'No Go Snow iMac G3!'

OK, slight update: I've managed to get the slot-loading CD drive to eject. I took the CD drive apart. I found the rollers were loose, so I first tried to glue them to the metal bar with superglue, but it didn't seem to work very well. Later I used rubber glue from a puncture repair kit, which seemed to be better. Neither is particularly easy, because pushing the rubber roller back onto the metal bar tends to push the glue out of the way, so I spun the roller as I pushed it on: I squeezed each roller to the bar for 5 minutes as I would with a normal puncture repair.

I then put the iMac...
Click to expand...
The belt seemed alright when I opened it, but I'll definitely look into a replacement next time I open it to closer inspect how the belt's doing. Though I am a bit unsure about the quality of the blank CDs I have as I can't find much about the brand online, is there still a way to flash a fully functional hard disk image onto the SSD from my PC?
 
Elate said:
The belt seemed alright when I opened it, but I'll definitely look into a replacement next time I open it to closer inspect how the belt's doing. Though I am a bit unsure about the quality of the blank CDs I have as I can't find much about the brand online, is there still a way to flash a fully functional hard disk image onto the SSD from my PC?
Click to expand...
Or it could be the roller. The rubber gets worn and can slip on the inner metal rod too. You can use dd in Linux or on a Mac to copy a HD image directly to an SSD. The command will look something like dd if=myImage.imgOrIsoOrWhatever of=/dev/sdMySSDorSD . This is possible if you have an SSD or SD adapter to your PC, e.g. USB->SSD. I used USB->IDE->mSATA at one point with my Mac mini G4.
 
You must log in or register to reply here.

Similar threads

E
iMac G3 DV 400 won't power on after taking out the metal shielding around the DVD-drive and HDD
Replies
3
Views
235
Elate
E
T
PowerMac/Performa 5xxx NOS tube swaps directly into slot load iMac G3
Replies
2
Views
174
Trekintosh
T
Snial
My Mad B&W G3 Setup!
2 3 4
Replies
65
Views
7K
joevt
J
gobabushka
Issues Booting MacOS 9 on Power Mac G4 450 DP
Replies
4
Views
2K
gobabushka
gobabushka
S
Weird SSD boot issue iMac G3 SSD
Replies
4
Views
1K
joevt
J
Back
Top