Macintosh SE/30 garbled screen

Hi all,

I recently purchased a SE/30 (and a classic II but thats still "in progress" recap wise.

The SE/30 I bought was sold to me as spares or repairs and the seller said it powers on but nothing comes up on the screen. Well when I got it it did indeed turn on and so I removed the case and lo and behold, the logic board was completly unplugged! I plugged it all in and tried the machine again and this time it powered up and made a chime! But the screen is all garbled

on the upside it does look like it has been recapped "recently". There was a bit of dust but no capacistor residue like there was in my Classic II. But to 100% convince me it has been recapped, someone has used radial capacitors where there should be axial. Also it looks like a previous owner has been nice enough to remove the PRAM battery before puting it into storage so no exploaded battery for me to deal with

I did go round the board and give it a good clean. I have heard that bad RAM could cause my issue but I cant get the RAM out of the slots, its the ones with the plastic hooks so I am afraid of breaking them. Also does anyone else struggle with connecting the Logic board up? There is so little room and especially the power cable is only just long enough to reach to the point where I can barely get my hands in to plug it in, the SE/30 has already claimed blood! I leave the speaker cable to last and I need a pair of tweezers to get that sucker in!

Ill attach some photos to this post

Cheers

That screen is evidence of ROM issues, clean and reseat the module. Yes, it looks like it has been recapped. You can use an ATX extension cable to extend the length of the SE/30 harness for testing

it's been "recapped" but I can see plenty of grime. personally I don't trust anything that isn't worked on by me or someone I trust (like @cheesestraws ).

i would consider it not recapped, and start by removing all the capacitors and cleaning it thoroughly.

screen isn't really garbled, that's just the initial values of the video memory brand you have on that board
it basically means that the video circuitry is working, but no data is getting to the video memory.

you say you heard a proper power chime (not a death chime). this usually rules out ROM or RAM issues as those would cause no chime or a death chime.



focus your efforts on this area, especially the circled area. all those multiplexers are in close proximity to leaky capacitors and often have broken traces in my experience. beep out all the lines using the redrawn SE/30 schematics

Byrd said:

That screen is evidence of ROM issues, clean and reseat the module. Yes, it looks like it has been recapped. You can use an ATX extension cable to extend the length of the SE/30 harness for testing

Click to expand...

finkmac said:

it's been "recapped" but I can see plenty of grime. personally I don't trust anything that isn't worked on by me or someone I trust (like @cheesestraws ).

i would consider it not recapped, and start by removing all the capacitors and cleaning it thoroughly.

screen isn't really garbled, that's just the initial values of the video memory brand you have on that board
it basically means that the video circuitry is working, but no data is getting to the video memory.

you say you heard a proper power chime (not a death chime). this usually rules out ROM or RAM issues as those would cause no chime or a death chime.

View attachment 93500

focus your efforts on this area, especially the circled area. all those multiplexers are in close proximity to leaky capacitors and often have broken traces in my experience. beep out all the lines using the redrawn SE/30 schematics

Click to expand...

I have reseated the RAM and ROM and still get the same issue. Ill have a look tomorrow around the area in red and poke around and see if I can see anything. Cheers

finkmac said:

someone I trust (like @cheesestraws ).

Click to expand...

You trust @cheesestraws? Dang...

Durosity said:

You trust @cheesestraws? Dang...

Click to expand...

Yeah was going to say, I'm not sure how I feel about this. Nonetheless, @Huttles, with that possible exception @finkmac's advice here is good...

cheesestraws said:

I'm not sure how I feel about this.

Click to expand...

You’re going to have to up your cunning deceitfulness..

Huttles said:

Also does anyone else struggle with connecting the Logic board up? There is so little room and especially the power cable is only just long enough to reach to the point where I can barely get my hands in to plug it in, the SE/30 has already claimed blood! I leave the speaker cable to last and I need a pair of tweezers to get that sucker in!

Click to expand...

Like anything else "compact", there isn't much room to work inside a compact Mac All of us have donated knuckle skin to the compact Mac chassis gods.

finkmac said:

it's been "recapped" but I can see plenty of grime. personally I don't trust anything that isn't worked on by me or someone I trust (like @cheesestraws ).

i would consider it not recapped, and start by removing all the capacitors and cleaning it thoroughly.

screen isn't really garbled, that's just the initial values of the video memory brand you have on that board
it basically means that the video circuitry is working, but no data is getting to the video memory.

you say you heard a proper power chime (not a death chime). this usually rules out ROM or RAM issues as those would cause no chime or a death chime.

View attachment 93500

focus your efforts on this area, especially the circled area. all those multiplexers are in close proximity to leaky capacitors and often have broken traces in my experience. beep out all the lines using the redrawn SE/30 schematics

Click to expand...

Just had a quick look. though ill be honest I am new when it comes to circuitry and I struggle to read schematics not found anything just yet but I did find a trace that looks a bit worse for wear. The trace directly under (if you have the board with the connectors facing away from you) the power socket. The trace goes from under the glue chip to a hole directly under the U in UE10. Not sure if the trace just passes through underneath or if it connects to the glue chip in anyway. I have taken some photos of the trace showing the dark areas and one point where the masking of the board has come away and you can see the copper trace.

I guess I better get my study cap on and learn how to read electrical schematics!

you're beeping it out with a multimeter... right?
visual inspections aren't enough

finkmac said:

you're beeping it out with a multimeter... right?
visual inspections aren't enough

Click to expand...

I am not sure where the trace goes to if i am honest

finkmac said:

it's been "recapped" but I can see plenty of grime. personally I don't trust anything that isn't worked on by me or someone I trust (like @cheesestraws ).

i would consider it not recapped, and start by removing all the capacitors and cleaning it thoroughly.

screen isn't really garbled, that's just the initial values of the video memory brand you have on that board
it basically means that the video circuitry is working, but no data is getting to the video memory.

you say you heard a proper power chime (not a death chime). this usually rules out ROM or RAM issues as those would cause no chime or a death chime.

View attachment 93500

focus your efforts on this area, especially the circled area. all those multiplexers are in close proximity to leaky capacitors and often have broken traces in my experience. beep out all the lines using the redrawn SE/30 schematics

Click to expand...

Just had a brainwave, you mentioned a "death chime" and to be honest, I know nothing of what the chime is meant to be. So I have just uploaded a short video of the SE30 powering on, I have only plugged in the power and speaker but its the same chime when the HD and Floppy are plugged in.

Looking around on youtube, it sounds to me like its a death chime, so if thats the case it is a RAM and/or ROM issue? ROM is easy to source but I have no idea where I could purchase RAM for the machine (apart from ebay....) I do have the 2 x 1mb sticks from my classic II I could plug in as I beleive the RAM is the same(?)

Link to video: