• Updated 2023-07-12: Hello, Guest! Welcome back, and be sure to check out this follow-up post about our outage a week or so ago.

USB 2 PCI Card for PowerMac 7500

pchristians

New member
Hi,

I have a PowerMac 7500 running 10.4.11 with XPostFacto. Basic setup is as follows:

-Sonnet 1Ghz G4

-1GB RAM

-ATI Radeon 9200

-Generic USB (1.1)

-Generic Ethernet card (10/100)

The setup works very well. However, I have been looking to replace the USB card with either a USB2/FireWire combo card (preferably) or just a USB2 card for that machine. (I want to connect an iPod at USB 2 speeds, and an external FW drive). However I don't really need the FW if combo cards are not recommended.

The question is:

- Is the 7500 able to handle USB2 reliably under OSX? (I know OS 9 only supports USB1, and I don't use it anyway). I have been looking on the internet but haven't found a clear answer to that. Many people report using USB2 combo cards and having system lockups, or having to stick to 1.1 speeds when connected to PCI Legacy Macs.

- If it is indeed possible to have the 7500 use USB 2 reliably, which card can I find on the market today? I have been looking but apparently they are really hard to find for 1rst gen PCI Macs.

The X Post Facto forum is pretty vacant these days, so I figure maybe someone here can give me a hand.

Thanks a lot.

 
Top