quinterro
Well-known member
I'm in the process of doing a fresh install of 8.6 on my suped-up 8100/110.
So far the only issue I am having with it is that the image is way too bright. It's a Thunder/24 with DSP card attached connected to a Viewsonic Mac-VGA adapter which is connected via KVM switch to an Acer 17: LCD panel.
I have tried to adjust the brightness by selecting one of the monitor calibration profiles and have had some slight success in the department.
The SuperMac 3.1 control panel and extension are installed. The DSP software is not yet installed.
Any ideas on getting the brightness/contrast to non-blinding levels?
So far the only issue I am having with it is that the image is way too bright. It's a Thunder/24 with DSP card attached connected to a Viewsonic Mac-VGA adapter which is connected via KVM switch to an Acer 17: LCD panel.
I have tried to adjust the brightness by selecting one of the monitor calibration profiles and have had some slight success in the department.
The SuperMac 3.1 control panel and extension are installed. The DSP software is not yet installed.
Any ideas on getting the brightness/contrast to non-blinding levels?