I just finished recapping an SE/30 (logic only, I'll do the analog+PSU after I get their caps), and now I have a new problem. When I cold power on the machine, I get a speaker pop, and the screen comes on with a blinking floppy as expected, but I get no chime. If I then reset the machine, I get a chime as expected. What could cause this? A capacitor? I replaced all the caps with tantalums.
Also, there's a faint roll to the screen (think VHS tapes), but that's probably due to me needing to recap the analog board.
Also, there's a faint roll to the screen (think VHS tapes), but that's probably due to me needing to recap the analog board.
Last edited by a moderator: